Power Metal Strip® Flip Chip Resistors (Extended Range) Patents Pending

Features

• SMD alternative for low power leaded wirewound resistors
• Excellent stability in different environmental conditions (< 0.5 % change in resistance)
• Superior overload and pulse handling capability as compared to thin film (as much as 2 x better)
• Low TCR, down to ± 15 ppm/K
• Low noise: < 0.01 µVRMS/V
• Very low inductance: < 0.08 µH
• Voltage coefficient: < 0.00001 %/V (< 0.1 ppm/V)
• Ask about further value ranges, tighter tolerances and TCR’s.
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
• 4-digit marking, according to MIL-PRF-55342 (except as noted in Ordering Information table), on top side.
• Rated voltage: .
• Contact factory using e-mail address at bottom of this page for resistance values available between 0.5 to 10 for 1506 and 0.5 to 100 for 2010 and 2512.
• Depending on solder pad dimensions.