TheCSCxxx01 single-in-line resistor networks provide the user with nominally equal resistors, each connected to a common pin (pin no. 1). Commonly used in the following applications:
TheCSCxxx03 single-in-line resistor networks provide the user with nominally equal resistors. Each resistor is isolated from all others. Commonly used in the following applications:
“WiredOR” pull-up • Long-line impedance balancing
Powerdriven pull-up • LED current limiting
Powergate pull-up • ECL output pull-down
Linetermination • TTL input pull-down
Note• “A” profile standard, “B” profile available
TheCSCxxx05 circuits contain series pairs of resistors. Each series pair is connected between two common lines. The junction of these resistor pairs is connected to the input terminals. The 05 circuits are designed for TTL dual-line termination and pulse squaring.
Note• “A” profile standard, “B” profile available
Applications
Isolated,bussed, and dual terminator schematics availableBody height: “A” profile = 0.195" (4.95 mm) and “B” profile = 0.295" (7.50 mm) standard; custom “C” profile = 0.350" (8.89 mm) also available“A” profile standard in 4 thru 12 pinsThick film resistive elementsReduces total assembly costsResistor elements protected by tough epoxy conformal coatingWide resistance range (10 Ω to 2.2 MΩ)Available in bulk pack as standard; optional tube pack is also availableMeets EIA/ECA-CB23 rev. G whisker test requirements for class 1A products
